Prof. Dr. Holger Militz

 
Staff Status
unigoe
 

1-86 of 86
 
The bibliographical data in your publication list are complete
You can correct existing data in the blue highlighted fields.To do this, please click on the coloured field. It is not possible to delete data here.
Fields that are not marked in colour (e. g. the authors) can be edited using the input form. To do so, click on the in front of the respective publication.
The bibliographic data in your publication list may be incomplete. You can
  • add any missing data in the fields marked in red or
  • correct existing data in the blue highlighted fields.
To do this, please click on the coloured field. It is not possible to delete data here.
Fields that are not marked in colour (e. g. the authors) can be edited using the input form. To do so, click on the in front of the respective publication.
Check/Uncheck all
  • 2022 Journal Article | Research Paper | 
    ​ ​Compression of Acetylated Beech (Fagus sylvatica L.) Laminated Veneer Lumber (LVL)​
    Slabohm, M.; Mayer, A. K. & Militz, H. ​ (2022) 
    Forests13(7).​ DOI: https://doi.org/10.3390/f13071122 
    Details  DOI 
  • 2022 Journal Article | Research Paper | 
    ​ ​Incising and Double Impregnation of Beech Sleepers—Investigation of an Alternative Preservation System for Wooden Railway Sleepers​
    Starck, M.; Heidel, A.; Brischke, C.   & Militz, H. ​ (2022) 
    Frontiers in Forests and Global Change5.​ DOI: https://doi.org/10.3389/ffgc.2022.814049 
    Details  DOI 
  • 2022 Journal Article | Research Paper | 
    ​ ​Investigations of the Chemical Distribution in Sorbitol and Citric Acid (SorCA) Treated Wood—Development of a Quality Control Method on the Basis of Electromagnetic Radiation​
    Kurkowiak, K.; Mayer, A. K.; Emmerich, L. & Militz, H. ​ (2022) 
    Forests13(2) art. 151​.​ DOI: https://doi.org/10.3390/f13020151 
    Details  DOI 
  • 2022 Journal Article | 
    ​ ​Vacuum Low-Temperature Microwave-Assisted Pyrolysis of Technical Lignins​
    Karthäuser, J.; Biziks, V. ; Frauendorf, H. ; Mai, C.   & Militz, H. ​ (2022) 
    Polymers14(16) pp. 3383​.​ DOI: https://doi.org/10.3390/polym14163383 
    Details  DOI 
  • 2022 Journal Article
    ​ ​Characterizing surface adhesion-related chemical properties of copper azole and disodium octaborate tetrahydrate-impregnated Eucalyptus grandis wood​
    Alade, A. A.; Naghizadeh, Z.; Wessels, C. B.; Stolze, H. & Militz, H. ​ (2022) 
    Journal of Adhesion Science and Technology, pp. 1​-24​.​ DOI: https://doi.org/10.1080/01694243.2022.2125208 
    Details  DOI 
  • 2022 Journal Article
    ​ ​Understanding the mode of action of sorbitol and citric acid (SorCA) in wood​
    Kurkowiak, K.; Hentges, D.; Dumarçay, S.; Gérardin, P. & Militz, H. ​ (2022) 
    Wood Material Science & Engineering, pp. 1​-9​.​ DOI: https://doi.org/10.1080/17480272.2022.2125340 
    Details  DOI 
  • 2022 Journal Article | 
    ​ ​Radial microfibril arrangements in wood cell walls​
    Maaß, M. C. ; Saleh, S.; Militz, H.   & Volkert, C. A. ​ (2022) 
    Planta256(4).​ DOI: https://doi.org/10.1007/s00425-022-03976-2 
    Details  DOI 
  • 2022 Journal Article | 
    ​ ​Effect of pressurized hot water extraction and esterification on the moisture properties and decay resistance of Scots pine ( Pinus sylvestris L.) sapwood​
    Kyyrö, S.; Altgen, M. ; Belt, T.; Seppäläinen, H.; Brischke, C. ; Heinze, P. & Militz, H.  et al.​ (2022) 
    Holzforschung76(10) pp. 916​-928​.​ DOI: https://doi.org/10.1515/hf-2022-0100 
    Details  DOI 
  • 2022 Journal Article | Research Paper | 
    ​ ​Non-Destructive Evaluation of the Cutting Surface of Hardwood Finger Joints​
    Stolze, H.; Gurnik, M.; Koddenberg, T.; Kröger, J.; Köhler, R.; Viöl, W. & Militz, H. ​ (2022) 
    Sensors22(10) pp. 3855​.​ DOI: https://doi.org/10.3390/s22103855 
    Details  DOI 
  • 2022 Journal Article | Research Paper | 
    ​ ​Bonding Acetylated Veneer for Engineered Wood Products—A Review​
    Slabohm, M.; Mai, C.   & Militz, H. ​ (2022) 
    Materials15(10) pp. 3665​.​ DOI: https://doi.org/10.3390/ma15103665 
    Details  DOI 
  • 2022 Journal Article | 
    ​ ​Biological Durability of Wood–Polymer Composites—The Role of Moisture and Aging​
    Buschalsky, A.; Brischke, C. ; Klein, K. C.; Kilian, T. & Militz, H. ​ (2022) 
    Materials15(23) art. 8556​.​ DOI: https://doi.org/10.3390/ma15238556 
    Details  DOI 
  • 2022 Journal Article | Research Paper
    ​ ​Bonding performance of hot-bonded acetylated beech ( Fagus sylvatica L.) laminated veneer lumber (LVL)​
    Slabohm, M. & Militz, H. ​ (2022) 
    Wood Material Science and Engineering, pp. 1​-6​.​ DOI: https://doi.org/10.1080/17480272.2022.2124544 
    Details  DOI 
  • 2021 Journal Article
    ​ ​Growth behavior of wood-destroying fungi in chemically modified wood: wood degradation and translocation of nitrogen compounds​
    Emmerich, L.; Bleckmann, M.; Strohbusch, S.; Brischke, C. ; Bollmus, S.   & Militz, H. ​ (2021) 
    Holzforschung75(9) pp. 786​-797​.​ DOI: https://doi.org/10.1515/hf-2020-0252 
    Details  DOI 
  • 2021 Journal Article
    ​ ​Improving fire retardancy of unheated and heat-treated fir wood by nano-sepiolite​
    Taghiyari, H. R.; Tajvidi, M.; Soltani, A.; Esmailpour, A.; Khodadoosti, G.; Jafarzadeh, H. & Militz, H.  et al.​ (2021) 
    European Journal of Wood and Wood Products,.​ DOI: https://doi.org/10.1007/s00107-021-01679-1 
    Details  DOI 
  • 2021 Journal Article
    ​ ​Mechanical properties and biological durability in soil contact of chemically modified wood treated in an open or in a closed system using glycerol/maleic anhydride systems​
    Mubarok, M.; Militz, H. ; Dumarcay, S.; Darmawan, W.; Hadi, Y. S. & Gérardin, P.​ (2021) 
    Wood Material Science and Engineering, pp. 1​-10​.​ DOI: https://doi.org/10.1080/17480272.2021.1872701 
    Details  DOI 
  • 2021 Journal Article | 
    ​ ​Penetration of Different Liquids in Wood-Based Composites: The Effect of Adsorption Energy​
    Taghiyari, H. R.; Majidi, R.; Arsalan, M. G.; Moradiyan, A.; Militz, H. ; Ntalos, G. & Papadopoulos, A. N.​ (2021) 
    Forests12(1) pp. 63​.​ DOI: https://doi.org/10.3390/f12010063 
    Details  DOI 
  • 2021 Journal Article | 
    ​ ​Weathering Stability and Durability of Birch Plywood Modified with Different Molecular Weight Phenol-Formaldehyde Oligomers​
    Grinins, J.; Biziks, V. ; Marais, B. N.; Rizikovs, J. & Militz, H. ​ (2021) 
    Polymers13(2) pp. 175​.​ DOI: https://doi.org/10.3390/polym13020175 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Effect of phenol-formaldehyde (PF) resin oligomer size on the decay resistance of beech wood​
    Biziks, V. ; Bicke, S.; Koch, G. & Militz, H. ​ (2020) 
    Holzforschung75(6) pp. 574​-583​.​ DOI: https://doi.org/10.1515/hf-2020-0020 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Use of computed tomography to determine penetration paths and the distribution of melamine resin in thermally-modified beech veneers after plasma treatment​
    Wascher, R.; Bittner, F.; Avramidis, G.; Bellmann, M.; Endres, H.-J.; Militz, H.   & Viöl, W.​ (2020) 
    Composites Part A: Applied Science and Manufacturing132 pp. 105821​.​ DOI: https://doi.org/10.1016/j.compositesa.2020.105821 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Wood modification research in Europe​
    Militz, H. ​ (2020) 
    Holzforschung74(4) pp. 333​.​ DOI: https://doi.org/10.1515/hf-2020-0050 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Study on the impregnation quality of rubberwood (Hevea brasiliensis Müll. Arg.) and English oak (Quercus robur L.) sawn veneers after treatment with 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU)​
    Emmerich, L. & Militz, H. ​ (2020) 
    Holzforschung74(4) pp. 362​-371​.​ DOI: https://doi.org/10.1515/hf-2019-0110 
    Details  DOI 
  • 2020 Journal Article | Research Paper
    ​ ​The Structural Origins of Wood Cell Wall Toughness​
    Maaß, M. C. ; Saleh, S.; Militz, H.   & Volkert, C. A. ​ (2020) 
    Advanced Materials32(16) pp. 1907693​.​ DOI: https://doi.org/10.1002/adma.201907693 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Resistance against subterranean termite of beech wood impregnated with different derivatives of glycerol or polyglycerol and maleic anhydride followed by thermal modification: a field test study​
    Mubarok, M.; Militz, H. ; Darmawan, I. W.; Hadi, Y. S.; Dumarçay, S. & Gérardin, P.​ (2020) 
    European Journal of Wood and Wood Products78(2) pp. 387​-392​.​ DOI: https://doi.org/10.1007/s00107-020-01503-2 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Long-term performance of DMDHEU-treated wood installed in different test set-ups in ground, above ground and in the marine environment​
    Emmerich, L.; Militz, H.   & Brischke, C. ​ (2020) 
    International wood products journal11(1) pp. 27​-37​.​ DOI: https://doi.org/10.1080/20426445.2020.1715553 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Suitability of a lignin-derived mono-phenol mimic to replace phenol in phenol-formaldehyde resin for use in wood treatment​
    Biziks, V. ; Fleckenstein, M.; Mai, C.   & Militz, H. ​ (2020) 
    Holzforschung74(4) pp. 344​-350​.​ DOI: https://doi.org/10.1515/hf-2019-0061 
    Details  DOI 
  • 2020 Journal Article | 
    ​ ​Surface Activation of Polylactic Acid-Based Wood-Plastic Composite by Atmospheric Pressure Plasma Treatment​
    Sauerbier, P.; Köhler, R.; Renner, G. & Militz, H. ​ (2020) 
    Materials13(20) pp. 4673​.​ DOI: https://doi.org/10.3390/ma13204673 
    Details  DOI 
  • 2020 Journal Article | 
    ​ ​Plasma Treatment of Polypropylene-Based Wood–Plastic Composites (WPC): Influences of Working Gas​
    Sauerbier, P.; Köhler, R.; Renner, G. & Militz, H. ​ (2020) 
    Polymers12(9) pp. 1933​.​ DOI: https://doi.org/10.3390/polym12091933 
    Details  DOI 
  • 2020 Journal Article | Research Paper | 
    ​ ​Studies into Fungal Decay of Wood In Ground Contact—Part 1: The Influence of Water-Holding Capacity, Moisture Content, and Temperature of Soil Substrates on Fungal Decay of Selected Timbers​
    Marais, B. N.; Brischke, C. ; Militz, H. ; Peters, J. H. & Reinhardt, L.​ (2020) 
    Forests11(12) pp. 1284​.​ DOI: https://doi.org/10.3390/f11121284 
    Details  DOI 
  • 2020 Journal Article | 
    ​ ​Assessment of Preservative-Treated Wooden Poles Using Drilling-Resistance Measurements​
    Sharapov, E.; Brischke, C.   & Militz, H. ​ (2020) 
    Forests11(1) pp. 20​.​ DOI: https://doi.org/10.3390/f11010020 
    Details  DOI 
  • 2020 Journal Article | 
    ​ ​Characterization of Archaeological European White Elm (Ulmus laevis P.) and Black Poplar (Populus nigra L.)​
    Ghavidel, A.; Hosseinpourpia, R. ; Militz, H. ; Vasilache, V. & Sandu, I.​ (2020) 
    Forests11(12) pp. 1329​.​ DOI: https://doi.org/10.3390/f11121329 
    Details  DOI 
  • 2020 Journal Article | 
    ​ ​Potential Use of Wollastonite as a Filler in UF Resin Based Medium-Density Fiberboard (MDF)​
    Taghiyari, H. R.; Esmailpour, A.; Majidi, R.; Morrell, J. J.; Mallaki, M.; Militz, H.   & Papadopoulos, A. N.​ (2020) 
    Polymers12(7) pp. 1435​.​ DOI: https://doi.org/10.3390/polym12071435 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Wood durability in terrestrial and aquatic environments – A review of biotic and abiotic influence factors​
    Marais, B. N.; Brischke, C.   & Militz, H. ​ (2020) 
    Wood Material Science and Engineering, pp. 1​-24​.​ DOI: https://doi.org/10.1080/17480272.2020.1779810 
    Details  DOI 
  • 2020 Journal Article | 
    ​ ​Beech wood modification based on in situ esterification with sorbitol and citric acid​
    Mubarok, M.; Militz, H. ; Dumarçay, S. & Gérardin, P.​ (2020) 
    Wood Science and Technology54(3) pp. 479​-502​.​ DOI: https://doi.org/10.1007/s00226-020-01172-7 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Three-Dimensional Exploration of Soft-Rot Decayed Conifer and Angiosperm Wood by X-Ray Micro-Computed Tomography​
    Koddenberg, T.; Zauner, M. & Militz, H. ​ (2020) 
    Micron134 pp. 102875​.​ DOI: https://doi.org/10.1016/j.micron.2020.102875 
    Details  DOI 
  • 2020 Journal Article | 
    ​ ​Sorption behavior and hydroxyl accessibility of wood treated with different cyclic N-methylol compounds​
    Emmerich, L.; Altgen, M. ; Rautkari, L. & Militz, H. ​ (2020) 
    Journal of Materials Science55(35) pp. 16561​-16575​.​ DOI: https://doi.org/10.1007/s10853-020-05224-y 
    Details  DOI 
  • 2020 Journal Article | 
    ​ ​Heat Treatment of Pine Wood: Possible Effect of Impregnation with Silver Nanosuspension​
    Taghiyari, H. R.; Bayani, S.; Militz, H.   & Papadopoulos, A. N.​ (2020) 
    Forests11(4) pp. 466​.​ DOI: https://doi.org/10.3390/f11040466 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Effect of Grain Direction on Drilling Resistance Measurements in Wood​
    Sharapov, E.; Brischke, C.   & Militz, H. ​ (2020) 
    International Journal of Architectural Heritage15(2) pp. 250​-258​.​ DOI: https://doi.org/10.1080/15583058.2020.1766158 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Chemistry and Spectroscopy of Renewable Materials, Part 2: Investigation of Suitably Esterified Wood Regarding Penetration and Distribution of the Chemically Modifying Reagent by Means of High-Resolution 3D Computed Tomography​
    Söftje, M.; Koddenberg, T.; Militz, H. ; Drafz, M. H. H.; Namyslo, J. C. & Kaufmann, D. E.​ (2020) 
    ACS Sustainable Chemistry & Engineering8(19) pp. 7353​-7358​.​ DOI: https://doi.org/10.1021/acssuschemeng.0c01574 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Weathering properties of wood-plastic composites based on heat-treated wood and polypropylene​
    Kuka, E.; Andersons, B.; Cirule, D.; Andersone, I.; Kajaks, J.; Militz, H.   & Bicke, S.​ (2020) 
    Composites Part A: Applied Science and Manufacturing139 pp. 106102​.​ DOI: https://doi.org/10.1016/j.compositesa.2020.106102 
    Details  DOI 
  • 2020 Journal Article
    ​ ​Fatigue behavior of beech and pine wood modified with low molecular weight phenol-formaldehyde resin​
    Pečnik, J. G.; Kutnar, A.; Militz, H. ; Schwarzkopf, M. & Schwager, H.​ (2020) 
    Holzforschung75(1) pp. 37​-47​.​ DOI: https://doi.org/10.1515/hf-2020-0015 
    Details  DOI 
  • 2020 Journal Article | 
    ​ ​Tensile and Impact Bending Properties of Chemically Modified Scots Pine​
    Bollmus, S. ; Beeretz, C. & Militz, H. ​ (2020) 
    Forests11(1) pp. 84​.​ DOI: https://doi.org/10.3390/f11010084 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Impact of drill bit feed rate and rotational frequency on the evaluation of wood properties by drilling resistance measurements​
    Sharapov, E.; Brischke, C. ; Militz, H.   & Toropov, A.​ (2019) 
    International wood products journal10(4) pp. 128​-138​.​ DOI: https://doi.org/10.1080/20426445.2019.1688455 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Prediction of modulus of elasticity in static bending and density of wood at different moisture contents and feed rates by drilling resistance measurements​
    Sharapov, E.; Brischke, C. ; Militz, H.   & Smirnova, E.​ (2019) 
    European Journal of Wood and Wood Products77(5) pp. 833​-842​.​ DOI: https://doi.org/10.1007/s00107-019-01439-2 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Non-biocide antifungal and anti-termite wood preservation treatments based on combinations of thermal modification with different chemical additives​
    Mubarok, M.; Dumarcay, S.; Militz, H. ; Candelier, K.; Thévenon, M. F. & Gérardin, P.​ (2019) 
    European Journal of Wood and Wood Products77(6) pp. 1125​-1136​.​ DOI: https://doi.org/10.1007/s00107-019-01468-x 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Chemical analysis and cellulose crystallinity of thermally modified Eucalyptus nitens wood from open and closed reactor systems using FTIR and X-ray crystallography​
    Wentzel, M.; Rolleri, A.; Pesenti, H. & Militz, H. ​ (2019) 
    European Journal of Wood and Wood Products77(4) pp. 517​-525​.​ DOI: https://doi.org/10.1007/s00107-019-01411-0 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Comparison of different treatments based on glycerol or polyglycerol additives to improve properties of thermally modified wood​
    Mubarok, M.; Dumarcay, S.; Militz, H. ; Candelier, K.; Thevenon, M. F. & Gérardin, P.​ (2019) 
    European Journal of Wood and Wood Products77(5) pp. 799​-810​.​ DOI: https://doi.org/10.1007/s00107-019-01429-4 
    Details  DOI 
  • 2019 Journal Article
    ​ ​The effect of fibreboard (MDF) disintegration technique on wood polymer composites (WPC) produced with recovered wood particles​
    Bütün, F. Y. ; Sauerbier, P.; Militz, H.   & Mai, C. ​ (2019) 
    Composites Part A: Applied Science and Manufacturing118 pp. 312​-316​.​ DOI: https://doi.org/10.1016/j.compositesa.2019.01.006 
    Details  DOI 
  • 2019 Journal Article | 
    ​ ​Wood Protection through Plasma Powder Deposition—An Alternative Coating Process​
    Köhler, R.; Sauerbier, P.; Ohms, G.; Viöl, W. & Militz, H. ​ (2019) 
    Forests10(10) pp. 898​.​ DOI: https://doi.org/10.3390/f10100898 
    Details  DOI 
  • 2019 Journal Article | 
    ​ ​Resistance of Injection Molded Wood-Polypropylene Composites against Basidiomycetes According to EN 15534-1: New Insights on the Test Procedure, Structural Alterations, and Impact of Wood Source​
    Krause, K. C. ; Brischke, C. ; Koddenberg, T.; Buschalsky, A.; Militz, H.   & Krause, A.​ (2019) 
    Fibers7(10) pp. 92​.​ DOI: https://doi.org/10.3390/fib7100092 
    Details  DOI 
  • 2019 Journal Article | Research Paper
    ​ ​Anatomical characteristics of thermally modified Eucalyptus nitens wood in an open and closed reactor system​
    Wentzel, M.; Koddenberg, T. & Militz, H. ​ (2019) 
    Wood Material Science & Engineering15(4) pp. 223​-228​.​ DOI: https://doi.org/10.1080/17480272.2019.1572649 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Dynamic and static mechanical properties of Eucalyptus nitens thermally modified in an open and closed reactor system​
    Wentzel, M.; Brischke, C.   & Militz, H. ​ (2019) 
    Maderas. Ciencia y tecnología,(ahead) pp. 0​-0​.​ DOI: https://doi.org/10.4067/S0718-221X2019005000201 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Physico-mechanical properties of thermally modified Eucalyptus nitens wood for decking applications​
    Wentzel, M.; González-Prieto, Ó.; Brischke, C.   & Militz, H. ​ (2019) 
    Drvna industrija70(3) pp. 235​-245​.​ DOI: https://doi.org/10.5552/drvind.2019.1838 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Activation of glucose with Fenton’s reagent: chemical structures of activated products and their reaction efficacy toward cellulosic material​
    Guo, W.; Xiao, Z.; Tang, L.; Zhang, Z.; Wang, Y. ; Lv, J. & Militz, H.  et al.​ (2019) 
    Holzforschung73(6) pp. 579​-587​.​ DOI: https://doi.org/10.1515/hf-2018-0153 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Visual and machine strength grading of European ash and maple for glulam application​
    Kovryga, A.; Schlotzhauer, P.; Stapel, P.; Militz, H.   & van de Kuilen, J. van de Kuilen, Jan-Willem G.​ (2019) 
    Holzforschung73(8) pp. 773​-787​.​ DOI: https://doi.org/10.1515/hf-2018-0142 
    Details  DOI 
  • 2019 Journal Article
    ​ ​Volumetric estimate of bordered pits in Pinus sylvestris based on X-ray tomography and light microscopy imaging​
    Koddenberg, T.; Wentzel, M. & Militz, H. ​ (2019) 
    Micron124 pp. 102704​.​ DOI: https://doi.org/10.1016/j.micron.2019.102704 
    Details  DOI 
  • 2018 Journal Article | Erratum
    ​ ​Corrigendum: Comparison of three dielectric barrier discharges regarding their physical characteristics and influence on the adhesion properties of maple, high density fiberboard and wood plastic composite (2017 J. Phys. D: Appl. Phys . 50 475206)​
    Peters, F.; Hünnekens, B. ; Wieneke, S. ; Militz, H. ; Ohms, G. & Viöl, W.​ (2018) 
    Journal of Physics D: Applied Physics51(15) pp. 159501​.​ DOI: https://doi.org/10.1088/1361-6463/aab378 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Relation of chemical and mechanical properties of Eucalyptus nitens wood thermally modified in open and closed systems​
    Wentzel, M.; Fleckenstein, M.; Hofmann, T.   & Militz, H. ​ (2018) 
    Wood Material Science and Engineering14(3) pp. 165​-173​.​ DOI: https://doi.org/10.1080/17480272.2018.1450783 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Coating performance on glutaraldehyde-modified wood​
    Xiao, Z.; Chen, H.; Mai, C. ; Militz, H.   & Xie, Y.​ (2018) 
    Journal of Forestry Research30(1) pp. 353​-361​.​ DOI: https://doi.org/10.1007/s11676-018-0620-y 
    Details  DOI 
  • 2018 Journal Article
    ​ ​The influence of curing conditions on the properties of European beech ( Fagus sylvatica ) modified with melamine resin assessed by light microscopy and SEM-EDX​
    Behr, G.; Bollmus, S. ; Gellerich, A.   & Militz, H. ​ (2018) 
    International wood products journal9(1) pp. 22​-27​.​ DOI: https://doi.org/10.1080/20426445.2017.1416738 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Effects of white rot and brown rot decay on the drilling resistance measurements in wood​
    Sharapov, E.; Brischke, C. ; Militz, H.   & Smirnova, E.​ (2018) 
    Holzforschung72(10) pp. 905​-913​.​ DOI: https://doi.org/10.1515/hf-2017-0204 
    Details  DOI 
  • 2018 Journal Article | Research Paper
    ​ ​Wood modification with DMDHEU (1.3-dimethylol-4.5-dihydroxyethyleneurea) – State of the art, recent research activities and future perspectives​
    Emmerich, L.; Bollmus, S.   & Militz, H. ​ (2018) 
    Wood Material Science & Engineering14(1) pp. 3​-18​.​ DOI: https://doi.org/10.1080/17480272.2017.1417907 
    Details  DOI 
  • 2018 Journal Article | 
    ​ ​Atmospheric Pressure Plasma Coating of Bismuth Oxide Circular Droplets​
    Köhler, R.; Ohms, G.; Militz, H.   & Viöl, W.​ (2018) 
    Coatings8(9) pp. 312​.​ DOI: https://doi.org/10.3390/coatings8090312 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Sorption and surface energy properties of thermally modified spruce wood components​
    Källbom, S.; Altgen, M. ; Militz, H.   & Wålinder, M.​ (2018) 
    Wood and Fiber Science50(3) pp. 346​-357​.​ DOI: https://doi.org/10.22382/wfs-2018-033 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Combined effect of wood moisture content, drill bit rotational speed and feed rate on drilling resistance measurements in Norway spruce ( Picea abies (L.) Karst.)​
    Sharapov, E.; Brischke, C. ; Militz, H.   & Smirnova, E.​ (2018) 
    Wood Material Science and Engineering15(4) pp. 198​-204​.​ DOI: https://doi.org/10.1080/17480272.2018.1557249 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Analyzing reversible changes in hygroscopicity of thermally modified eucalypt wood from open and closed reactor systems​
    Wentzel, M.; Altgen, M.   & Militz, H. ​ (2018) 
    Wood Science and Technology52(4) pp. 889​-907​.​ DOI: https://doi.org/10.1007/s00226-018-1012-3 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Density and density profile changes in birch and spruce caused by thermo-hydro treatment measured by X-ray computed tomography​
    Biziks, V. ; Van Acker, J.; Militz, H. ; Grinins, J. & Van den Bulcke, J.​ (2018) 
    Wood Science and Technology53(2) pp. 491​-504​.​ DOI: https://doi.org/10.1007/s00226-018-1070-6 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Penetration depth of phenol-formaldehyde (PF) resin into beech wood studied by light microscopy​
    Biziks, V. ; Bicke, S. & Militz, H. ​ (2018) 
    Wood Science and Technology53(1) pp. 165​-176​.​ DOI: https://doi.org/10.1007/s00226-018-1058-2 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Morphological imaging and quantification of axial xylem tissue in Fraxinus excelsior L. through X-ray micro-computed tomography​
    Koddenberg, T. & Militz, H. ​ (2018) 
    Micron111 pp. 28​-35​.​ DOI: https://doi.org/10.1016/j.micron.2018.05.004 
    Details  DOI 
  • 2018 Journal Article
    ​ ​UV-blocking properties of Zn/ZnO coatings on wood deposited by cold plasma spraying at atmospheric pressure​
    Wallenhorst, L.; Gurău, L.; Gellerich, A. ; Militz, H. ; Ohms, G. & Viöl, W.​ (2018) 
    Applied Surface Science434 pp. 1183​-1192​.​ DOI: https://doi.org/10.1016/j.apsusc.2017.10.214 
    Details  DOI 
  • 2018 Journal Article
    ​ ​Impact of plasma treatment under atmospheric pressure on surface chemistry and surface morphology of extruded and injection-molded wood-polymer composites (WPC)​
    Hünnekens, B. ; Avramidis, G.; Ohms, G.; Krause, A.; Viöl, W. & Militz, H. ​ (2018) 
    Applied Surface Science441 pp. 564​-574​.​ DOI: https://doi.org/10.1016/j.apsusc.2018.01.294 
    Details  DOI 
  • 2018 Journal Article
    ​ ​The influence of curing conditions on properties of melamine modified wood​
    Behr, G.; Gellerich, A. ; Bollmus, S. ; Brinker, S. & Militz, H. ​ (2018) 
    European Journal of Wood and Wood Products76(4) pp. 1263​-1272​.​ DOI: https://doi.org/10.1007/s00107-018-1290-3 
    Details  DOI 
  • 2017 Journal Article
    ​ ​Plywood made from plasma-treated veneers: Shear strength after shrinkage-swelling stress​
    Wascher, R.; Avramidis, G.; Kühn, C.; Militz, H.   & Viöl, W.​ (2017) 
    International Journal of Adhesion and Adhesives78 pp. 212​-215​.​ DOI: https://doi.org/10.1016/j.ijadhadh.2017.07.003 
    Details  DOI 
  • 2017 Journal Article
    ​ ​Improvement of mechanical properties of thermally modified hardwood through melamine treatment​
    Behr, G.; Bollmus, S. ; Gellerich, A.   & Militz, H. ​ (2017) 
    Wood Material Science and Engineering13(5) pp. 262​-270​.​ DOI: https://doi.org/10.1080/17480272.2017.1313313 
    Details  DOI 
  • 2017 Journal Article
    ​ ​Hydrophobic recovery of atmospheric pressure plasma treated surfaces of Wood-Polymer Composites (WPC)​
    Hünnekens, B. ; Krause, A.; Militz, H.   & Viöl, W.​ (2017) 
    European Journal of Wood and Wood Products75(5) pp. 761​-766​.​ DOI: https://doi.org/10.1007/s00107-017-1175-x 
    Details  DOI 
  • 2017 Journal Article | 
    ​ ​Comparison of three dielectric barrier discharges regarding their physical characteristics and influence on the adhesion properties on maple, high density fiberboards and wood plastic composite​
    Peters, F.; Hünnekens, B. ; Wieneke, S. ; Militz, H. ; Ohms, G. & Viöl, W.​ (2017) 
    Journal of Physics D: Applied Physics50(47) pp. 475206​.​ DOI: https://doi.org/10.1088/1361-6463/aa8fad 
    Details  DOI 
  • 2017 Journal Article
    ​ ​Exploring the potential of high resolution mass spectrometry for the investigation of lignin-derived phenol substitutes in phenolic resin syntheses​
    Dier, T. K. F.; Fleckenstein, M.; Militz, H.   & Volmer, D. A.​ (2017) 
    Analytical and Bioanalytical Chemistry409(13) pp. 3441​-3451​.​ DOI: https://doi.org/10.1007/s00216-017-0282-1 
    Details  DOI 
  • 2017 Journal Article
    ​ ​Topographic, optical and chemical properties of zinc particle coatings deposited by means of atmospheric pressure plasma​
    Wallenhorst, L.; Loewenthal, L.; Avramidis, G.; Gerhard, C. ; Militz, H. ; Ohms, G. & Viöl, W.​ (2017) 
    Applied Surface Science410 pp. 485​-493​.​ DOI: https://doi.org/10.1016/j.apsusc.2017.03.021 
    Details  DOI 
  • 2017 Journal Article
    ​ ​Modification of beech veneers with lignin phenol formaldehyde resins in the production of laminated veneer lumber (LVL)​
    Fleckenstein, M.; Biziks, V. ; Mai, C.   & Militz, H. ​ (2017) 
    European Journal of Wood and Wood Products76(3) pp. 843​-851​.​ DOI: https://doi.org/10.1007/s00107-017-1275-7 
    Details  DOI 
  • 2017 Journal Article
    ​ ​Accessibility of hydroxyl groups in anhydride modified wood as measured by deuterium exchange and saponification​
    Beck, G.; Strohbusch, S.; Larnøy, E.; Militz, H.   & Hill, C.​ (2017) 
    Holzforschung72(1) pp. 17​-23​.​ DOI: https://doi.org/10.1515/hf-2017-0059 
    Details  DOI 
  • 2016 Journal Article
    ​ ​Impact of air-plasma treatment at atmospheric pressure on wood and wood extractives​
    Avramidis, G.; Wascher, R.; Militz, H.   & Viöl, W.​ (2016) 
    International wood products journal7(2) pp. 76​-79​.​ DOI: https://doi.org/10.1080/20426445.2016.1162429 
    Details  DOI 
  • 2016 Journal Article
    ​ ​Bonding of acetylated wood​
    Bongers, F.; Meijerink, T.; Lütkemeier, B.; Lankveld, C.; Alexander, J.; Militz, H.   & Lehringer, C.​ (2016) 
    International wood products journal7(2) pp. 102​-106​.​ DOI: https://doi.org/10.1080/20426445.2016.1161944 
    Details  DOI 
  • 2016 Journal Article
    ​ ​Improved resource efficiency and cascading utilisation of renewable materials​
    Geldermann, J. ; Kolbe, L. M. ; Krause, A.; Mai, C. ; Militz, H. ; Osburg, V.-S. & Schobel, A.  et al.​ (2016) 
    Journal of Cleaner Production110 pp. 1​-8​.​ DOI: https://doi.org/10.1016/j.jclepro.2015.09.092 
    Details  DOI  WoS 
  • 2015 Journal Article
    ​ ​Shear strength of furfurylated, N-methylol melamine and thermally modified wood bonded with three conventional adhesives​
    Bastani, A.; Adamopoulos, S. & Militz, H. ​ (2015) 
    Wood Material Science and Engineering12(4) pp. 236​-241​.​ DOI: https://doi.org/10.1080/17480272.2016.1164754 
    Details  DOI 
  • 2012 Journal Article | Research Paper | 
    ​ ​Fungal colonisation of outside weathered modified wood​
    Pfeffer, A.; Hoegger, P. J.; Kües, U.   & Militz, H. ​ (2012) 
    Wood Science and Technology46(1-3) pp. 63​-72​.​ DOI: https://doi.org/10.1007/s00226-010-0386-7 
    Details  DOI  WoS 
  • 2009 Journal Article | 
    ​ ​The efficacy of commercial silicones against blue stain and mould fungi in wood​
    Ghosh, S. C.; Militz, H.   & Mai, C.​ (2009) 
    European Journal of Wood and Wood Products67(2) pp. 159​-167​.​ DOI: https://doi.org/10.1007/s00107-008-0296-7 
    Details  DOI  WoS 
  • 2009 Journal Article
    ​ ​Protection mechanisms of DMDHEU treated wood against white and brown rot fungi​
    Verma, P.; Junga, U.; Militz, H.   & Mai, C.​ (2009) 
    Holzforschung63(3) pp. 371​-378​.​ DOI: https://doi.org/10.1515/HF.2009.051 
    Details  DOI  WoS 

Publication List

Type

Subtype

Date issued

Author

Peer-Reviewed

Organization

Language

Fulltext

Options

Citation Style

https://publications.goettingen-research-online.de URI: /cris/rp/rp36544
ID: 0000000
PREF: default TOKEN:

0

Sort

Issue Date
Title

Embed

JavaScript
Link

Export

Activate Export Mode
Deactivate Export Mode

Select some or all items (max. 800 for CSV/Excel) from the publications list, then choose an export format below.